- I'd be more than willing to purchase a PCM-burner if I were able to download updates from a Ford web site. I look at it this way-I update my computer at home, not because I have a problem, but because I want to prevent a problem before it happens. I really don't mean to be confrontational, but I don't believe your 'Windows' analogy holds water.
- R/Ford: Ford stuff goes here. Why did I have to pay to have my PCM updated? I have a 2011 Fiesta SE with 49,000 miles. The check engine light came on, so I took it to the dealer. They needed to update the computer program for the car, which cost me $135. It costs money to access the.
Oct 15, 2010 well the car was playing up the other day idle was a bit lumpy and the engine just didnt feel smooth so popped it into my local ford for a pcm update £83 total price plus a health check and i was pleasantly surprised it took about an hour and a bit to do but the idle was sorted the engine was sm.
Includes: Ford, Lincoln, Mercury
SAE J2534
For access to SAE J2534 information visit the service information website: www.motorcraftservice.com.
Software calibrations for use by SAE J2534 pass-thru tools are found under the “Reprogramming” tab. Under this tab choose “Module Programming and Initialization”. Scroll down for SAE J2534 information. This page describes subscription benefits, shows latest calibration information, minimum PC requirements, validated J2534 devices and the process overview.
The Motorcraft Service website provides aftermarket users with access to Module Programming and Initiation. Register as a user before purchasing services from this website. From the main page, select “Register Today”. Once registered, a technician can then purchase a subscription to download the software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set programmable parameters on Ford, Lincoln and Mercury vehicles.
VIDEO: Reflashing demo of a 2008 Ford Fusion with Subscription & FMP Setup (11 min)
Which models and model years of vehicles can be reprogrammed?
Emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present.
Non-emission-related modules on many vehicles (UBP and medium speed MSCan are not supported)
In addition, module initialization (PATS) functions such as keycode erase/Reprogram and PCM parameter reset can be done using this application.
How does a technician determine whether a reprogramming event is needed for a particular vehicle?
Go to www.motorcraftservice.com, select the “Reprogramming” tab, then choose “Module Programming and Initialization”. Scroll down and select “Latest Calibration Information” and you will be directed to a web page where you select the vehicle. After listing vehicle information, select “Submit' to get a list of the latest part number for that application.
You can then compare the latest part number with the actual number installed on the vehicle to determine if a reprogram is needed.
What OEM equipment is available to reprogram vehicles?
Ford Motor Company uses the IDS (Integrated Diagnostic Software) as the full service diagnostic tool.
IDS is a flexible diagnostic tool that utilizes standard computing platforms to work with Ford's VCM device. An IDS software license is required to use IDS software with a VCM or VCM II. The use of the IDS software requires a software license which can be purchased for an additional fee. To purchase the IDS software license, go to www.motorcraftservice.com, select the “Reprogramming” tab, then choose IDS Software Licensing.
VCM :The Vehicle Communication Module (VCM) communicates with Ford vehicles through the 16-pin diagnostic link connector. This device is used by the IDS software and is the core of Ford’s diagnostic strategy.
The VCM II was introduced in the second half of 2012. The IDS software will support both the VCM and the VCM II.
For SAE J2534 equipment, go to www.motorcraftservice.com, then select the Diagnostic Tool Support tab.
Pass-thru devices can be purchased from a third-party supplier. There is a list of validated SAE J2534 pass-thru tools under the “Reprogramming” tab. From this tab choose “Module Programming and Initialization”. Scroll down to find the list of SAE J2534 accepted pass-thru devices.
How does a technician obtain the Calibration?
Ford Pcm Module Location
Identify computer system requirements needed to support reprogramming.
Pcm Update Cost
The most current requirements are available on www.motorcraftservice.com under the “Reprogramming” tab, then choose “Module Programming and Initialization”. Scroll down to find minimum PC and software requirements.
Ford Pcm Software
Revised 2/4/2016